連絡先
イグス株式会社

〒130-0013 東京都墨田区錦糸1-2-1

アルカセントラル15階

03(5819)2030
03(5819)2055

Gears & Gear racks Online-Shop

The gears made of tribologically optimised iglidur® high-performance polymers impress with their significantly higher service life than gears made of comparable plastics.
Due to fine-tuned additives of reinforcement materials and solid lubricants, they do not require additional lubrication.
In the industry's largest test laboratory, the gears made of iglidur® materials are thoroughly tested to continuously improve their service life.

カテゴリー
フィルター
サイズ

製品の数: 19

新製品

iguform S270 gears, mm

  • Low coefficient of friction
  • Low humidity absorption
  • Low-noise

8 different modules available. Choose from over 300 dimensions.

Matching gear racks available here

For information on tolerances, please refer to the product description.
1.96 USD/個から
出荷可能な318型式中:
314 は 6~7週間後
購入はこちら
新製品

iguform S270 gear racks, mm

  • Low coefficient of friction
  • Low humidity absorption
  • Low-noise

Matching modules available for the gear product range.

You will find information on the length in the product description.
お問合せ
出荷可能な8型式中:
8 は 6~7週間後
購入はこちら
新製品

igutek P360 gears, mm

  • Increased wear resistance
  • Good tribological specifications
  • Very robust
  • Resistant to shock loads

8 different modules available. Choose from over 300 dimensions.

Matching gear racks available here

For information on tolerances, please refer to the product description.
2.26 USD/個から
出荷可能な317型式中:
315 は 6~7週間後
購入はこちら
新製品

igutek P360 gear racks, mm

  • Increased wear resistance
  • Good tribological specifications
  • Very robust
  • Resistant to shock loads

Matching modules available for the gear product range.

You will find information on the length in the product description.
6.01 USD/個から
出荷可能な8型式中:
8 は 6~7週間後
購入はこちら

クシロデュールB180、ギヤ、mm

  • 低い摩擦係数
  • 連続運転のための耐摩耗性材質
  • 高い減振性
  • 3種類のハブ形状
9.75 USD/個から
出荷可能な9型式中:
9 は 6~7週間後
購入はこちら

iguform S270 bevel gears - ratio 1:1

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.
お問合せ
出荷可能な8型式中:
8 は 6~7週間後
購入はこちら

イグリデュールF、ギヤ、mm

  • 導電性 
  • 高い圧縮強度
  • 高温耐性
  • 3種類のハブ形状

iglidur® A500 gear, mm

  • The endurance runner at higher temperatures in the food sector
  • Compliant with Regulation (EU) No. 10/2011
  • FDA compliant
  • Temperature resistant from -100°C to +250°C

igutek P360 bevel gears - ratio 1:1

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.
お問合せ
出荷可能な8型式中:
8 は 6~7週間後
購入はこちら

iguform S270 bevel gears - ratio 1:1,5

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1.5) can be combined with each other. Please make sure to select the same module.
お問合せ
出荷可能な2型式中:
2 は 6~7週間後
購入はこちら

iguform S270 bevel gears - ratio 1:2

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.
お問合せ
出荷可能な10型式中:
10 は 6~7週間後
購入はこちら

iguform S270 bevel gears - ratio 1:3

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet


Please note: In order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:3) can be combined with each other. Please make sure to select the same module.
お問合せ
出荷可能な8型式中:
8 は 6~7週間後
購入はこちら

iguform S270 bevel gears - ratio 1:4

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:4) can be combined with each other. Please make sure to select the same module.
お問合せ
出荷可能な6型式中:
6 は 6~7週間後
購入はこちら

iguform S270 bevel gears - ratio 1:5

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:5) can be combined with each other. Please make sure to select the same module.
お問合せ
出荷可能な2型式中:
2 は 6~7週間後
購入はこちら

igutek P360 bevel gears - ratio 1:2

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.
お問合せ
出荷可能な10型式中:
10 は 6~7週間後
購入はこちら
"igus", "energy chain systems", "energy chain", "e-chain systems", "chainflex", "iglidur", "igubal", "drylin", "readychain", "triflex", "robolink", "easy chain", "motion plastics"は、igus GmbHの登録商標です。"dry-tech", "ジッパー", "isense", "smart cable chainflex", "e-skin" は、イグス株式会社の登録商標です。“xiros“, “e-loop“, “CFCLEAN“はイグス株式会社の商標です。

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.