- 要件: 捻回(ねじれ)使用対応
- 外被: PUR
- 全体シールド
- クーラント耐性
- ノッチ対策
- 耐油性: 耐油性(DIN EN 50363-10-2準拠)
- 難燃性
- 耐加水分解性、耐微生物分解性
- 耐紫外線性
- チェーンフレックス クラス: 6.1.3.4
チェーンフレックス バスケーブル CFROBOT8.PLUS
- ねじれ・捻回使用における高い負荷に対応
- ロボットや3D動作に対応
- 非常に高い耐油性、耐バイオオイル性
- 捻回 ±360°/ ケーブル1mあたり
- 屋内・屋外での使用、耐紫外線性
- ロボット、ハンドリング、送りねじ付きアクチュエータ
チェーンフレックス・バスケーブルは、特にエナジーチェーン内での連続使用向けに開発・試験されています。
使用されている外被および構造により、バスケーブルの機械的性質や耐薬品性は異なります。
電気設計においては、各バスシステムの電気特性を満たしていること並びに、高レベルのEMC(電磁両立性)対策が重要となります。
電気特性の安定性は、連続可動に関わらず全耐用年数にわたり確保されます。
しかしながら、高い伝送能力は使われるケーブルだけに依存するわけではありません。
むしろ、すべての要素(電子部品、接続方法)の正確な選定と、各システムの最長伝送率を考慮することを必要とします。
信頼性の高い伝送はケーブルだけでは実現できません。
新たに設計するバスシステムについては、これらすべての要件を考慮し、目的に適うかどうか事前に広範囲の試験をすることをお勧めいたします。
Guaranteed service life for this series according to guarantee conditions
Further information: chainflex® guarantee
Cycles* | 5 million | 7.5 million | 10 million | ||
---|---|---|---|---|---|
Temperature, | v max. [°/s] | a max. [°/s²] | Torsion max. | R min. [Factor x d] | R min. [Factor x d] |
from/to [°C] | twisted | twisted | [°/m] | [°/m] | [°/m] |
-25 / -15 | ±330 | ±240 | ±150 | ||
-15 / +60 | 360 | 60 | ±360 | ±270 | ±180 |
+60 / +70 | ±330 | ±240 | ±150 |
Technical note on bus cables
chainflex® bus cables have been specially developed and tested for continuously moving use in e-chains® applications. Depending on the outer jacket material and the design principle, the bus cables are designed for different mechanical requirements and media resistance. The cables have been electrically designed in such a way that, on the one hand, the electrical requirements of the respective bus specification are reliably met and, on the other, that great value is placed on a high degree of EMC reliability. It is also ensured that the electrical values remain stable over the long term in spite of permanent movement. However, the overall quality of transmission in a complete bus communication system is not solely dependent on the cable used. Rather, it requires precise co-ordination of all components (electronic components,
connection technology and cable) as well as observing the maximum transmission levels depending on the respective systems in relation to the required data transmission rates. A cable is therefore not solely responsible for the secure transmission of signals.
igus® advises you when you are designing your bus system to take all these factors into account and, with extensive tests, helps you to ensure the process reliability of your system from the very beginning.