耐食性の送りねじサポートブロックドライスピン レーザー焼結サポートブロック ねじサイズ6～24mmでは、実用的な送りねじサポートブロックが利用可能です。取付オプションにはすべり軸受タイプと高加速用のボールベアリング(BB)タイプとがあります。すべての送りねじサポートブロックは、適合する送りねじクランプリングと同様に、硬質アルマイト処理アルミニウム製です。► 無潤滑・メンテナンスフリー
► 送りねじ支持用ハウジング
►設置のための取付穴
► 位置表示器付き手動クランプなどのアクセサリーの接続に対応
► ねじ径6mm以上の送りねじ用に、レーザー焼結で製作したサポートブロックが利用可能
► 台形ねじ、およびドライスピンねじ用もあり
FL： アルマイト処理クランプリング付きフィックスベアリング（右ねじ）と、メンテナンスフリーイグリデュールすべり軸受
LL：フローティングベアリング、メンテナンスフリーイグリデュールすべり軸受
LH： 左ねじ（オプション）TR10、TR2、TR10、TR3のみ
_________________________________________________________________________________________
Why are there different versions? The bearing arrangement has to fulfil the principle of clarity. Furthermore, the bearing must ensure the defined control of the force flow. If it does, the bearing is considered statically determined. There are various bearing options, such as the
fixed floating bearing and the
double-sided floating bearing. Fixed floating bearing:the fixed bearing clearly positions the shaft in an axial direction. The fixed bearing must therefore absorb both radial and axial forces and guide them into the surrounding structure. This can basically be fulfilled by a single bearing. The floating bearing corrects parallelism errors minimally and offers thermal expansion capability, which means that the cable is not stressed.
Advantages of fixed floating bearing
► No axial clearance
► Non-critical shaft expansion (due to such factors as temperature)
► Suitable for changing axial loads
► Clarity of forces applied
Double-sided floating bearing:in a double-sided floating bearing, the lead screw is not clearly fixed in the axial direction. This means that without stressing the bearing, mechanical or thermal differences in length can be absorbed, but the lead screw is not protected against drifting. This has to be considered in particular when dealing with positioning applications.
Advantages of double-sided floating bearings:
► Cost-effective
► Low design cost
► Non-critical shaft expansion (due to such factors such factors as temperature) in the area of clearance
Disadvantages:
► Not clearly fixed in the axial direction
► Not suited to changing axial loads
► Only if axial clearance does not impair function
_________________________________________________________________________________________
Versions
Fixed bearing version (FL)Depending on thread dimensions, this version has the clamping ring clamped into the lead screw itself or to the lead screw's outer diameter. For high helix lead screws, it is always the outer diameter that it is clamped to.
► Note:
you can also choose a bearing block for your application that uses the measurement d1 for clamping onto the turned machined end.
Floating bearing (FL):depending on the lead screw's dimensions, a machined end must be turned to the value d1. You can see below which dimensions this applies to. The floating bearing block merely supports the lead screw. This type does not prevent the lead screw from drifting.
Ball bearing type (BB):this bearing block should always be used in case of highly dynamic applications, e.g. when a motor is involved
_________________________________________________________________________________________
送りねじ端部加工のヒント： | 部品番号 | d1 mm | | | | | | | | | | | | | | |
| SLS-16-LL | 12 |
| SLS-16-LL | 12 |
| SLS-18-LL | 12 |
| SLS-18-LL | 12 |
| SLS-18-LL | 12 |
| SLS-18-LL | 12 |
| SLS-20-LL | 12 |
| SLS-24-LL | 14 |
| SLS-S16-LL | 12 |
| SLS-S18-LL | 12 |
| SLS-S20-LL | 12 |
► 最大荷重容量に関する注記: 送りねじナットの最大荷重を超えることがあります。
